Honda combination Regulator Rectifier – CB350F CB400F CB500 CB550 CB750


If your Honda has the old separated regulator and rectifier setup, and you want to simplify things, hide things away easier or just upgrade to modern technology, our integrated regulator-rectifier combo is just the thing you need. Comes pre wired to suit a simple drop in installation for classic Honda models, can also be used on other models with minor wiring change. Get your charging system up to task for today’s electronics and batteries, upgrade the regulator rectifier! Suitable for Lead Acid, Gel, AGM and Lithium batteries

Dimensions: 82mm Long x 30mm tall x 80mm wide
Mounting Hole spacing – 66mm (measured center to center)

Wiring: The white 5 wire connector plugs into the stock wiring harness, replacing the old rectifier. The 3 male spade connectors plug in where the old regulator connected. Corroded / loose / damaged wiring is a very common cause for charging system issues, make sure all connections are clean and secure. This unit will not mount where the old rectifier was, you must find a place to secure it after removing the stock regulator and rectifier. The body of the unit does not need to be grounded.